Hydraulic Nut
with high pressure grease nipple (axial)
10 mm stroke
 


 

Printversion of the datasheet
Article- No. Thread
up to Ø A
mm 		Ring Piston
Area
mm2 		Force at
700 bar
kN 		OD
DA
mm 		Height
H
mm
Ring
Ø D1
mm
piston
Ø D2
mm 		Stroke
Smax.
mm
A 4850.05 36 1.759 123 83 60 46 66 10
A 4850.07 52 2.262 158 100 60 62 82 10
A 4850.08 68 2.827 198 120 60 80 100 10
A 4850.09 80 3.299 231 135 60 95 115 10
A 4850.10 100 3.421 239 155 60 112 130 10
A 4850.11 125 5.149 360 185 60 138 160 10
A 4850.12 140 5.184 363 205 60 155 175 10
A 4850.13 165 5.969 418 230 60 180 200 10
A 4850.14 185 6.660 466 252 60 202 222 10
A 4850.15 200 8.934 625 270 60 215 240 10
A 4850.16 225 12.868 901 302 60 240 272 10
A 4850.17 245 10.701 749 315 60 260 285 10
A 4850.18 260 13.902 973 340 65 280 310 10
A 4850.19 280 14.844 1039 360 65 300 330 10
A 4850.20 310 19.679 1378 400 70 330 366 10
A 4850.21 340 23.876 1671 440 70 360 400 10
A 4850.22 370 15.806 1106 455 70 390 415 10
A 4850.23 400 20.499 1435 490 75 420 450 10

Any other design up to 1000 mm Ø possible due to our own design department.

Standard Features      Variations in equipment      Funktional Characteristics

Advantages      Examples for Application


The distinguishing feature of Hydraulic Nut A 4850 ist the practical relation between compact design and possible stroke (4 mm) and obtainable clamping forces as well.
Simply connect a hand or motor pump to produce high clamping forces. Depressurize by bleeding the hydraulic medium (grease). Operated from the end face. Ready to use in no time!
For stroke of 4 mm: see Type A 4800

Click here and you will see the Example for ordering: SCHAAF-Article-No.
A 4850.12 with thread M 110 x 4, Left Hand


Please let us know your requirements; we will be pleased to submit a quick quotation without obligation for you.

last datasheet    next datasheet    Return to Overview