|
with 2 hydraulic connection bores on the side rectangular design |
|
|
|
|
| Article- No. |
Thread up to Ø A mm |
Ring Piston Area mm2 |
Force at 400 bar kN |
Length L mm |
Width B mm |
Height H mm |
Ring
Ø D1mm |
piston
Ø D2mm |
Stroke Smax. mm |
Hydraulic Connection AB |
| A 5100.01 | 12 | 550 | 22 | 60 | 40 | 25 | 18 | 32 | 2,5 | 2 x G 1/8 |
| A 5100.02 | 12 | 550 | 22 | 70 | 40 | 30 | 18 | 32 | 2,5 | 2 x G 1/4 |
| A 5100.03 | 18 | 643 | 26 | 70 | 50 | 30 | 25 | 38 | 2,5 | 2 x G 1/4 |
| A 5100.04 | 18 | 643 | 26 | 70 | 50 | 35 | 25 | 38 | 5 | 2 x G 1/4 |
| A 5100.05 | 36 | 1.759 | 70 | 80 | 80 | 50 | 46 | 66 | 4 | 2 x G 1/4 |
| A 5100.06 | 30 | 2.062 | 82 | 80 | 80 | 45 | 40 | 65 | 2,5 | 2 x G 1/4 |
| A 5100.07 | 25 | 1.501 | 60 | 90 | 70 | 40 | 35 | 56 | 2,5 | 2 x G 1/4 |
| A 5100.08 | 25 | 1.501 | 60 | 90 | 70 | 40 | 35 | 56 | 2,5 | 2 x M14 x 1,5 |
Any other design up to 1000 mm Ø possible due to our own design department.
|
Advantages Examples for Application
The distinguishing feature of Hydraulic Nut A 5100 is the use of oil as a pressure medium. The 2 pressure connection bores allow several Hydraulic Nuts to be interlinked. Interlinked Hydraulic Nuts all have the same pressure = the same clamping force. In particular, these Hydraulic Nuts may be remote controlled: clamping and releasing on push of a button is possible. Operated from the connection bores on outside faces. In particular, designed for piping in series. There are also designs with the connection bores out of axis of symmetry or with holes for fastening screws. Click here and you will see Example for ordering: SCHAAF-Article-No. A 5100.05 with thread M 24 x 3, Right Hand Please let us know your requirements; we will be pleased to submit a quick quotation without obligation for you. 
|