Hydraulic Nut PG11
Axial Bolt Tensioning using High-Pressure Hydraulic
Cost-reducing - Powerful - Reusable
Basic setup
Screw the Hydraulic Nut (HM) on the bolt to be pretensioned, and down to the flanges' surface. A hydraulic high-pressure generator pumps the oil through a high-pressure hose into the space between cylinder and piston. The hydraulic pressure rises.
Piston
Bolt to tension
Cylinder
Bolt elongation
Through the rising pressure and the resulting axial force, the bolt is elongated and the flange parts are compressed. The lock nut is lifted off the cylinder. When the preset pre-tensioning force is achieved, the pressure supply is stopped.
Locking Nut
Screwing the lock nut
The pre-tensioning force has been achieved and the lock nut is turned by hand down to the stop face of the cylinder. Thus, the pre-tensioning force is maintained within the screw joint and the hydraulic may be released. The Hydraulic Nut remains on the bolt connection.
Advantages
„Crossover-tightening“ of several bolts at several points is no longer necessary, since SCHAAF SSV and HM offer the possibility of tightening all the bolt connections simultaneously with exactly the same tensioning force. This also applies when increasing the tensioning force.
As opposed to thermal screw starting procedures, SCHAAF SSV and HM make it possible to eliminate different gaps between individual components. Each bolt can be tensioned with exactly the same force and not over the same distance!
SCHAAF SSV and HM make it possible to apply a residual tensioning force by means of test force stress application in order to determine if any settling of the screw may occur, and if so, to eliminate it.
With a compact unit and the ability to interchange the component parts relating to the size of the bolt, SCHAAF SSV can also be used for other thread sizes.
SSV and HM will dramatically save time required for tensioning applications. This effect increases for higher tensioning forces, larger bolt thread diameters and also the installation of several SCHAAF SSV or HM. Time savings up to 99% are
possible! It is no longer necessary to apply large torque by hand. There is a number of handling features available, designed to make work easier with SCHAAF Bolt Tensioners and Hydraulic Nuts, especially when it comes to large dimensions.
Features HM PG11
- smaller outer diameter than PG 10
- for recessed bolt thread
- larger stroke than PG 9 and 10
- high pre-tensioning force with small outer diameter
- stable piston guidance
- pre-tensioning force is maintained without pressure
More Hydraulic Nuts
A HM of product group 9 is characterised by the fact that an axial force is generated and can be maintained by pressurisation.
A HM of product group 10 is characterised by the fact that the pre-tensioning force transmitted by an annular piston is maintained by means of a mechanical counter-holder without leaving the HM permanently pressurised.
A HM of product group 11 is characterised by the fact that the pre-tensioning force transmitted by a stepped piston is maintained by means of a nut part separate from the pressure cylinder, without leaving the HM permanently pressurised.
A HM of product group 12 is characterised by the fact that the pre-tensioning force transmitted by a stepped piston is maintained by means of a mechanical counter-holder without leaving the HM permanently pressurised.
A HM of product group 13 is characterised by the fact that several HM are integrated as a compound in or on a ring or similar and thus several bolt threads can be clamped simultaneously.
Versions
In addition to a number of standardized Bolt Tensioners and Hydraulic Nuts, SCHAAF has already delivered thousands of customized axial Bolt Tensioners. The Design on Demand CAD system allows to realize customer solutions very quickly. Based on axial pre-tensioning technics, a number of patented, specialized solutions have been developed during the last years. Bolt Tensioners, Hydraulic Nuts and ExpaTen, as well as the A-Loc and EcoRolls, both developed especially for rolling mills, all represent a 100% system solution with SCHAAF’s accessories such as high-pressure hoses and high-pressure generators.
Areas of Application
The application areas for Bolt Tensioners and Hydraulic Nuts are unlimited. The great amount of user solutions have resulted in a great number of various designs. For this reason it is not always possible to classify all Bolt Tensioners and Hydraulic Nuts into a specific product group. For example, the tensioning force can be transmitted by a thread or a bayonet. Please contact us for your special application.
Quality Assurance
All Bolt Tensioning Tools and Hydraulic Nuts are checked for material quality, dimensional accuracy, proper operation, and pressure resistance.
They are subject to quality assurance measures during order execution and delivered with detailed documentation.
Services
SSV and HM are, of course, delivered packaged, ready for installation and operation.
SCHAAF SSV and HM are user-friendly, reliable and are manufactured in accordance with the highest level of technical know-how. Our highly-motivated
staff will be pleased to train your personnel, in situ or at our works, in the general handling of high-pressure equipment.
Related Accessories
Fully assembled and ready for immediate use Hand lever pump up to 4,000 bar hydraulic pressure.
