Hydraulic Nut PG10

Axial Bolt Tensioning using High-Pressure Hydraulic

Cost-reducing - Powerful - Reusable
Hydraulic Nuts do not require a thread projection as Bolt Tensioners do and, therefore, can be used in older constructions to replace conventional torque wrenched bolt connections. For large bolt connections in particular, this eases work and increases the safety of the tension force. Compared with Bolt Tensioners, Hydraulic Nuts enable quicker changing times for connections that need tightening and loosening on a regular basis. This speeds up checking load forces.
The distinguishing feature of the Hydraulic Nuts of product group 10 is that the axial pretensioning force is produced by a ring piston and maintained by a mechanical lock ring and that the hydraulic pressure may be released.

Advantages

„Crossover-tightening“ of several bolts at several points is no longer necessary, since SCHAAF SSV and HM offer the possibility of tightening all the bolt connections simultaneously with exactly the same tensioning force. This also applies when increasing the tensioning force.

As opposed to thermal screw starting procedures, SCHAAF SSV and HM make it possible to eliminate different gaps between individual components. Each bolt can be tensioned with exactly the same force and not over the same distance!

SCHAAF SSV and HM make it possible to apply a residual tensioning force by means of test force stress application in order to determine if any settling of the screw may occur, and if so, to eliminate it.

With a compact unit and the ability to interchange the component parts relating to the size of the bolt, SCHAAF SSV can also be used for other thread sizes.

SSV and HM will dramatically save time required for tensioning applications. This effect increases for higher tensioning
forces, larger bolt thread diameters and also the installation of several SCHAAF SSV or HM. Time savings up to 99% are
possible! It is no longer necessary to apply large torque by hand. There is a number of handling features available, designed to make work easier with SCHAAF Bolt Tensioners and Hydraulic Nuts, especially when it comes to large dimensions.

Features HM PG10

  • integrated mechanical locking
  • pre-tensioning force is maintained without pressure
  • otherwise, like PG 9

More Hydraulic Nuts

A HM of product group 9 is characterised by the fact that an axial force is generated and can be maintained by pressurisation.

A HM of product group 10 is characterised by the fact that the pre-tensioning force transmitted by an annular piston is maintained by means of a mechanical counter-holder without leaving the HM permanently pressurised.

A HM of product group 11 is characterised by the fact that the pre-tensioning force transmitted by a stepped piston is maintained by means of a nut part separate from the pressure cylinder, without leaving the HM permanently pressurised.

A HM of product group 12 is characterised by the fact that the pre-tensioning force transmitted by a stepped piston is maintained by means of a mechanical counter-holder without leaving the HM permanently pressurised.

A HM of product group 13 is characterised by the fact that several HM are integrated as a compound in or on a ring or similar and thus several bolt threads can be clamped simultaneously.

HM Speziallösungen

Versions

In addition to a number of standardized Bolt Tensioners and Hydraulic Nuts, SCHAAF has already delivered thousands of customized axial Bolt Tensioners. The Design on Demand CAD system allows to realize customer solutions very quickly. Based on axial pre-tensioning technics, a number of patented, specialized solutions have been developed during the last years. Bolt Tensioners, Hydraulic Nuts and ExpaTen, as well as the A-Loc and EcoRolls, both developed especially for rolling mills, all represent a 100% system solution with SCHAAF’s accessories such as high-pressure hoses and high-pressure generators.

Areas of Application

The application areas for Bolt Tensioners and Hydraulic Nuts are unlimited. The great amount of user solutions have resulted in a great number of various designs. For this reason it is not always possible to classify all Bolt Tensioners and Hydraulic Nuts into a specific product group. For example, the tensioning force can be transmitted by a thread or a bayonet. Please contact us for your special application.

Qualität

Quality Assurance

All Bolt Tensioning Tools and Hydraulic Nuts are checked for material quality, dimensional accuracy, proper operation, and pressure resistance.

They are subject to quality assurance measures during order execution and delivered with detailed documentation.

Serviceleistung

Services

SSV and HM are, of course, delivered packaged, ready for installation and operation.

SCHAAF SSV and HM are user-friendly, reliable and are manufactured in accordance with the highest level of technical know-how. Our highly-motivated
staff will be pleased to train your personnel, in situ or at our works, in the general handling of high-pressure equipment.

Related Accessories

Fully assembled and ready for immediate use Hand lever pump up to 4,000 bar hydraulic pressure.

High-pressure generators optimally matched to our high-pressure tools.

Hydraulic high-pressure accessories specially adapted to the function.

MEDIA AND MORE

Print / Animation
Read all the information.
References
View completed and released projects on SSV.
Online Meeting / Webinar
Register for a free online presentation on this product.

Industry-specific special solutions:

All SCHAAF products offer an individual solution for every industry.

HM proves particularly effective for:

╳
WordPress Cookie Plugin by Real Cookie Banner